Suzhou Huaxinmao Electronics Co

Features: B is a device that uses a milling cutter to run at high speed to cut multi-piece aluminum substrates with a thickness less than 3., and R can be divided according to pre-edited paths. It replaces manual breaking or cutting defects, improves product quality and reduces scrap rate. This machine adopts human-machine interface operating system, concise and user-friendly interface design, automatic cutting path correction system, high-pixel program production and block program and Single-step program editing and modification, B's loading and unloading device with two platforms working interactively, can effectively reduce machine waiting time, thereby achieving ideal production efficiency.
Equipped with a 30,000-pixel magnifying lens to assist in the simulation program tutorial and the function of editing the cutting area. Use the mouse to click on the starting path and then slide along the cutting point to confirm the cutting distance. The diameter of the simulated milling cutter circle can be determined according to the cutting width. Adjustment ensures the flatness of the cutting surface and the edge of the board and achieves complete cutting.
Automatic R-point positioning and correction system, the moving path has real-time display and simulated route tracking, the display is clear at a glance, automatic alignment correction function, higher cutting accuracy, as long as B is offset within 3, machine vision will Automatic route correction can be performed, which relaxes the operator's accuracy requirements when placing plates and greatly improves work efficiency.
The program's left and right workbench copy, block copy, display, multi-angle connecting plate copy, single-step tracking modification function, and block editing and modification function accurately simplify the program production time and improve editing efficiency.
The vacuum cleaner made of high-power imported fans and high-voltage static elimination device have more ideal dust collection effect and less noise.
With tool life monitoring function, the milling cutter will automatically rise and fall to another uncut blade position after cutting a certain distance. The up and down distance and times can be set according to the blade length to extend the milling cutter life.
Use two platforms to process and place the B substrate with continuous sliding exchange, reducing waiting time and increasing output.
B board can be cut: *3*3
This machine also provides new customers with a set of completely sealed cutting jigs for free. The jigs are open and close, only exposing the gaps and vacancies to be cut. On the one hand, the dust-proof effect ensures that dust will not splash into other areas during high-speed cutting. The dust is directly blown down by the ion fan above, and the intensive exhaust system on the bottom quickly sucks the dust into the dust box. The second aspect is protection. In the third aspect, the slight displacement or vibration of the circuit board during cutting is eliminated. The jig can be retracted and placed according to the positioning of the jig, which facilitates the unified retracting and placing of the cut single circuit board when the jig is taken out.
In addition, the warranty period of this machine is two years.
Technical parameters:

Workbench area


Stroke


Guide rail/screw
Japanese B guide rail Japanese B screw

Positioning accuracy


Cutting accuracy


Servo system
Servo motor imported from Japan Panasonic

Spindle power
High-speed variable frequency motor, imported motor

Spindle speed
~r/) adjustable
< br/> Spindle cutter
Left-hand rotation.~

Control host
Industrial control

Cutting speed
~/Adjustable,

Cutting function
Can perform straight line, arc, and circle cutting

Dust treatment
Lower static eliminator treatment (gapless surrounding of cutting jig)
/>
Dust collection method
Lower dust collection + independent dust collection

Working noise
Less than minutes

Continuous trouble-free working time< br/> Hours

B-curve depanel machine configuration table
Hardware
Hardware name
Brand or model description
Spindle
Taiwan Star< br/>
/3
Lens

Screw/guide rail
Imported precision ground ball screw, linear widened guide rail
Servo motor
-/CNC, series servo motor
Motion control card
Taiwan Shen Lide
Static eliminator
Series
Industrial computer
Foxconn R/3/3
Monitor
Dell LCD" and Shuangfeiyan
Vacuum cleaner
Jiuzhou
Pneumatic components
Taiwan Yadeke

Software
/> Control system
(r3..3)
Operation interface
Chinese
Programming
Online mode
Vision system
High pixel computing type Precision vision (independent development)
Control software
Huaxinmao. Official version

Provided by: Suzhou Huaxinmao Electronics Co., Ltd.
Contact person: Miss Luo